Why are normal rubber pads not good for sandblasting and what should you use instead?

Why are normal rubber pads not good for sandblasting and what should you use instead?

Generally produced and distributed rubber sheets usually have a Tensile Strength of 2-7 MPa. and are not resistant to wear. Not resistant to abrasion Of course, commercially available rubber pads are not designed for sandblasting applications.

Not strong enough to support the impact of grains of sand or hard grits. As a result, when used, the rubber sheet will wear quickly and worse, there will be sand grains bouncing back which is a huge obstacle in work.

Therefore, for sandblasting applications whether to be assembled with a sandblasting machine or lining the walls of the sandblasting room Therefore, you should choose to use a rubber sheet that is specifically designed for sandblasting work, namely Sand/Shot Blasting Rubber Sheet, wear resistant. increase the working cycle for a longer time It prevents sand from falling, which significantly reduces your maintenance costs and time.

The sandblasting rubber sheet has the following characteristics

• Extremely tough and wear resistant (Abrasion Resistance < 100 mm3)
• Strong High Tensile Strength > 20 Mpa.
• Hardness 40-50 Shore A
• Flexible and has a very high bounce
  

And currently available for you to choose from both red sandblasting rubber pads pink rubber sandblasting sheet Black sandblasting rubber sheet, including reinforced sandblasting rubber sheet with an initial thickness of 2 mm or more.


If you are looking for Sand/Shot Blasting Rubber Sheet for machine assembly. sandblast room wall You can inquire and consult at the brand HyperSheet
Through the channel LINE OA : @PTIRUBBER  |  Tel : 022577154  MB : 0863077319  |  Email: info@ptigroups.com 
HyperSheet by Polytech Industry Company Limited